Lubrication with system - Intelligent solutions for your machines and systems

The automatic lubricators of the CONCEPT series from Schaeffler supply different lubrication points of your machines with the right amount of grease at the right time and thus significantly extend the service life of the rolling bearings.

 

Advantages of automated lubrication

• Correct grease supply to each bearing position.
• Optimised grease quantities and lubrication intervals.
• Only small amount of lubricant: Positive influence on stable bearing temperature.
• Fully automatic, low-maintenance operation.
• Savings in personnel costs compared to manual relubrication.
• Risk of accidents for personnel is avoided.
• The risk of mixing up lubricants is largely eliminated.
• Longer bearing life, always fresh grease and no temperature fluctuations.
• Increased machine availability.
• Reduced service costs.

Lubricator for rolling bearing lubrication

CONCEPT 2: Electromechanical lubricator for two lubrication points

The battery- or mains-operated lubricator CONCEPT2 is a highly efficient, microprocessor-controlled piston pump for specific and demand-oriented minimum quantity lubrication of one or two lubrication points with grease or oil.

Can be operated via an external control with pulse or via the integrated time control.

Properties & USPs

More information

• Time saving due to fewer maintenance intervals
• Increased working safety for lubrication points that are difficult to access
• Sealed, dust-tight, waterproof system according to protection class IP65
• Available with bearing-specific ARCANOL grease or as empty unit
• Can be filled by the customer with his preferred grease (NLGI class <=2)
• No mixing or initial grease exchange required!
• Refillable up to 3 times - reduces waste and costs

_________________________________________________________________________________________________________

CONCEPT 4: Electromechanical lubricator for four lubrication points

The CONCEPT4 lubrication system is a very compact lubricant pump for minimum quantity lubrication. It contains two pump bodies, each with two outlets.

Can only be operated via an external control with pulse.

Properties & USPs

More information

• Time saving due to fewer maintenance intervals
• Increased working safety for lubrication points that are difficult to access
• Sealed, dust-tight system
• Cartridges available with bearing-specific ARCANOL grease or as empty cartridges
• Empty cartridges can be filled by the customer with his preferred grease (NLGI class <=2)
• No mixing or initial grease exchange
• Refillable up to 3 times
• Reduces waste and costs for our customers

_________________________________________________________________________________________________________

CONCEPT 8: Electromechanical lubricator for eight lubrication points

The CONCEPT8 lubrication system is a very compact lubricant pump for minimum quantity lubrication. It contains two or four pump bodies, each with two outlets.

Can be operated via an external control with pulse or via the integrated time control.

Properties & USPs

More information

• Time saving due to fewer maintenance intervals
• Increased working safety for lubrication points that are difficult to access
• Sealed, dust-tight system
• Cartridges available with bearing-specific ARCANOL grease or as empty cartridges
• Empty cartridges can be filled by the customer with his preferred grease (NLGI class <=2)
• No mixing or initial grease exchange
• Refillable up to 3 times
• Reduces waste and costs for our customers

_________________________________________________________________________________________________________

Applications

Can be used for all types of applications and many locations:

• Electric motors
• Pumps
• Compressors and fans
• Housings
• Conveyor system
• Machine tools

• Lifts and moving staircases
• Beverage industry
• Wood industry
• Chain lubrication
• Sewage treatment plants
• Food industry

• Quarries, concrete and cement works
• Paper industry
• Recycling industry
• Lubrication of gears

_________________________________________________________________________________________________________

Automatic or preferably manual lubrication?

Our technical experts will answer the following questions, among others:
• What are the advantages of automatic lubricators?
• When does it make sense to use lubricators?
• Which lubricant is suitable for your application?

 

Get in touch with us:

Sales and technical support
Mr Martin Schärer (Product Manager)
Phone 055 415 18 77

Application engineer
Mr Urs Wälchli (Application engineer)
Phone 079 691 52 22

 

Go back